Hand Tracking Manual

1. Open the box and choose the screw that matches the hole diameter of the screw at the bottom of the headset.
2.After assembling the module as shown in the figure below, insert the screws from the red circle screw holes, and choose a screwdriver of appropriate size to tighten the screws.
 
3. After insert the module to Type-C, connect the headset with PC, Pitool will prompt Hand tracking has been inserted and detected, and provide a driver download button.
4. Click it and start to download the driver for hand tracking module.
5. Install the driver according to the instruction.
 
6. Finished.
7. Demo download: Recommended Gaming
8. SDK download: Hand Tracking SDK