Pimax Setup
 
Installation and user guide
1) Connect your headset to your computer
    1. Connect the data cable USB interface, DP interface and power adapter to the corresponding slot
    2. Plug the power adapter into a power outlet
    3. Connect the data cable USB connector to the USB 2.0/3.0/3.1 port on your computer.
    4. Connect the data cable DP interface to the DP port on the discrete graphics card. Do not connect to the DP port on the motherboard.
    5. The connection between the equipment cable and the PC desktop is as shown in the figure below

                  Note:New shipped headsets are designed without power adapter.

               6.After the device is properly connected, the screenshot of the PC is as follows.
               
                7. If you do not have base station in hands, uncheck the Lighthouse Tracking in the
                PiTool settings and check 9-Axis.
                note: If you mainly into Sims then no Lighthouses are not required as you cab use 3dof. However many
                simmers will recommend having at least 1 Lighthouse; the reason is the ability to lean. Without a lighthouse you
                cannot lean forward, backwards or Left & Right. So for example if you do a shoulder check in a car sim your view
                maybe obscured by the headrest.
 
                
                
2) PiTool Installation Notes
  1. Please make sure the N card driver is the latest version before installation.
  2. PiTool Download link
  3. Before installing pitool, it is recommended to exit security guards and anti-virus software first.
  4. PiTool User Manual
3) How to use SteamVR
  1. Browse Steam official website,  click to download and install the Steam program, as shown below
  2. Steam program
    1. After installing the Steam software, open Steam, click on the Library—-Tools, find Steam VR, click Install.
      steam Install
    1. After installation, open SteamVR, the first time you need Steam VR room settings, click Run Room Setup first.
      Room Setup
    1. Select standing only mode.
      standing only mode
    1. Calibration space, when the head-mounted display is ready, click Next.
      head-mounted display
    1. To calibrate the ground, it is recommended that the helmet be placed facing the display and placed on the ground. Enter “0” and click Next to complete.

  1. The Steam VR interface displayed after the room setup is completed is as follows.
    room setup is completed
4) How to watch the video (without controllers and basestations)
    1. After opening Steam VR, right click Steam VR to find the running media player, click to run.
      running media player
    1. Open into the Steam VR Media Player, you can find the video path you want to play through the left side of the interface, click on the video to play it.
  1. The built-in player has a rich play setting function, and the user can adjust the settings according to the requirements. The following is the function of the main interface of the play.
    built-in player
    built-in player
5) Recommended by other video players(without controllers and basestations)
NO.1 Simple VR Video Player (Need to start Steam VR)
Simple VR Video Player
    1. Move the mouse to the player and click it to become a red dot. The red dot uses the head movement control.
    1. head movement control
    1. Move the red dot to the head, click Menu, then find Files, then click Drives to select the path to play the video.


  1. There are various basic operations under the video and an interface to switch between 360-degree format, 180-degree format, 3D SBS (left and right format), and 3D OU (up and down format).
    3D SBS
 
6) Steam VR game with keyboard/mouse support(without controllers and basestations)
War Thunder
 
DCS World Steam Edition
 
X-Plane 11
 
Assetto Corsa
 
Age of Sail
 
Project CARS - Pagani Edition
 
Aerofly FS 2 Flight Simulator
 
Titans of Space 2.0
 
Thumper
 
Thank you for choosing Pimaxproduct, wish you a happy life!